Chapter 9
problem a Solve
Wireless indicator light (continued)
Wireless button | Description | Solution |
light |
|
|
Wi r e l e s s |
|
|
|
|
|
Blinking | The product cannot | 1. Check if the wireless |
| connect to a wireless | router or access point |
| network. | is turned on. |
| No wireless signal | 2. Move the product |
| available but wireless | closer to the wireless |
| radio on the product is | router or access point. |
| turned on. |
|
|
|
|
Blinking | The product is | Wait for product to connect |
| searching for | to an access point. |
| available wireless |
|
| networks. |
|
| Wireless Protected |
|
| Setup (WPS) in |
|
| progress. |
|
|
|
|
Fast blinking | Wireless Protected | Press any key to clear the |
| Setup (WPS) | error or wait for one minute. |
| progress error. |
|
|
|
|
Solution: If you receive the
1
2Plastic tape with pink pull tab (must be removed before installing)
3Ink nozzles under tape
Cause: When the product detected that only one print cartridge is installed, ink- backup mode is initiated. This printing mode lets you print with a single print cartridge, but it slows the product and affects the quality of printouts.
58 Solve a problem