Chapter 2

One-in-All HP the up setting Finish

b. Print WPS PIN.

￿Press and hold the Scan button for two seconds.

￿Wireless test starts.

￿Wireless test report and Network Configuration report are printed automatically.

c. Set up wireless connection.

￿Press and hold the Wireless button for two seconds.

￿Enter the PIN on a computer for the router.

￿The Wireless icon and signal strength bar appear solid on successful configuration of the wireless network.

d. Install software

NOTE: The product begins a timer for approximately two minutes in which the corresponding button on the networking device needs to be pressed.

Related topics

“Install the software for a network connection” on page 8

Test wireless setup and print network configuration page

The wireless network test performs a series of diagnostic tests to determine whether network setup is successful. You can print the wireless network test at any time.

You can print a network configuration page to see network settings such as the IP address, communication mode, and network name (SSID).

To print the network configuration page

▲Press and hold the Scan button to initiate the wireless test and print the Network Configuration and Network Test pages.

You can also change the printer's default language, using the HP Solution Center, to print the Network Configuration Page and Network Test Report in your desired language.

Change the default language using HP Solution Center

1.Connect the product to the computer.

2.Open HP Solution Center to access the embedded web server. a. Click Start, and then Programs.

b. Click HP Deskjet F4500 All-in-One series, and then click Solution Center.

6 Finish setting up the HP All-in-One