HP f50 15 inch, f70 17 inch manual To connect the cables to the f50 monitor

hp pavilion f50/f70 LCD Monitor Setting Up the Monitor

To connect the cables to the f50 monitor:

1Make sure the computer is turned off.

2Plug the video cable into the correct video connector (VGA or DVI-D) on the back of the monitor and into the corresponding video connector on the computer. Secure the cable by tightening the thumbscrews.

VGA cable →	VGA connector
DVI-D cable →	DVI-D connector

NOTE: The f50 monitor comes with both a VGA and a DVI-D connector. Some models come with a VGA cable, and others come with a DVI-D cable as well. Using both video connectors, you can connect this monitor to two computers at the same time. You may need to purchase the DVI-D cable.

3Plug the DC adapter cable into the connector on the back of the monitor.

4Plug the power cord into the DC adapter and into the main power source.

5Turn on the main power source (for example, a surge protector), and then turn on the power switch for both the computer and the monitor.

To disconnect the cables from the f50 monitor:

1Turn off the power switch for the monitor and the computer and then turn off the main power source.

2Disconnect the power cord from the main power source and from the DC adapter cable.

3Disconnect the DC adapter cable from the connector at the back of the monitor.

4Unscrew the thumbscrews on the video cable(s) and disconnect the video cable(s).

X13