hp pavilion f50/f70 LCD Monitor Setting Up the Monitor

Connecting the cables to the f70 monitor

Look at the following diagram and follow the steps listed below to connect the cables to the f70 17-inch LCD monitor.

CAUTION: This monitor is equipped with an auto-sensing power supply for voltage ranges 100—240 V~, 50/60 Hz. Use the monitor with the supplied DC adapter only.

Microphone

(pink)

Audio out

(green)

OR

DC In

Video

cable

connectors

 

DVI VGA

Volume control

Video cable (VGA)

Audio

DC adapter

cable

 

with attached DC cable

 

Power

 

cord

Power source

To connect the cables to the f70 monitor:

1Make sure the computer is turned off.

2Plug the video cable into the correct video connector (VGA or DVI-D) on the back of the monitor and into the corresponding video connector on the computer. Secure the cable by tightening the thumbscrews.

 

VGA cable

VGA connector

 

 

 

 

 

 

DVI-D cable

DVI-D connector

 

 

 

 

 

 

 

 

 

14

English

 

X

Page 14
Image 14
HP f70 17 inch, f50 15 inch manual Connecting the cables to the f70 monitor, To connect the cables to the f70 monitor