Enabling displaying the copyright statement

The device by default displays the copyright statement when a Telnet or SSH user logs in, or when a console or AUX user quits user view. You can disable or enable the function as needed. The following is a sample copyright statement:

******************************************************************************

* Copyright (c) 2010-2012 Hewlett-Packard Development Company, L.P.

*

* Without the owner's prior written consent,

*

* no decompiling or reverse-engineering shall be allowed.

*

******************************************************************************

To enable displaying the copyright statement:

Step

 

Command

Remarks

1.

Enter system view.

system-view

N/A

 

 

 

 

2.

Enable displaying the

copyright-info enable

Enabled by default.

 

copyright statement.

 

 

 

Configuring banners

Banners are messages that the system displays during user login.

The system supports the following banners:

•Legal banner—Appears after the copyright or license statement. To continue login, the user must enter Y or press Enter. To quit the process, the user must enter N. Y and N are case-insensitive.

•Message of the Day (MOTD) banner—Appears after the legal banner and before the login banner.

•Login banner—Appears only when password or scheme authentication has been configured.

•Incoming banner—Appears for Modem users.

•Shell banner—Appears for non-Modem users.

Banner message input modes

You can configure a banner in one of the following ways:

•Single-line input

Input the entire banner in the same line as the command. The start and end delimiters for the banner must be the same but can be any visible character. The input text, including the command keywords and the delimiters cannot exceed 510 characters. In this mode, do not press Enter before you input the end delimiter. For example, you can configure the shell banner "Have a nice day." as follows:

<System> system-view

[System] header shell %Have a nice day.%

•Multiple-line input

Input message text in multiple lines. In this approach, the message text can be up to 2000 characters. Use one of the following methods to implement multi-line input mode:

95