Figure 66 Setting the time zone
3.Configure the time zone and daylight saving time as described in Table 16.
4.Click Apply.
Table 16 Configuration items
Item | Description |
Time Zone | Set the time zone for the system. |
|
|
| Adjust the system clock for daylight saving time changes, which means adding one hour to |
| the current system time. |
| Click Adjust clock for daylight saving time changes to expand the option, as shown |
| in Figure 67. You can configure the daylight saving time changes in the following ways: |
Adjust clock for | • Specify that the daylight saving time starts on a specific date and ends on a specific date. |
daylight saving | The time range must be greater than one day and smaller than one year. For example, |
time changes | configure the daylight saving time to start on August 1st, 2006 at 06:00:00 a.m., and |
| end on September 1st, 2006 at 06:00:00 a.m. |
| • Specify that the daylight saving time starts and ends on the corresponding specified days |
| every year. The time range must be greater than one day and smaller than one year. For |
| example, configure the daylight saving time to start on the first Monday in August at |
| 06:00:00 a.m., and end on the last Sunday in September at 06:00:00 a.m. |
Figure 67 Setting the daylight saving time
Date and time configuration example
In this example, Device A is the firewall.
Network requirements
The local clock of Device A is set as the reference clock, with the stratum of 2. Device B operates in client mode, and uses Device A as the NTP server.
88