HP Firewall Configuring temperature thresholds for a device or a module

To set the port status detection timer:

Step		Command	Remarks
1.	Enter system view.	system-view	N/A

2.	Set the port status detection	shutdown-interval time	By default, the port status detection
	timer.	shutdown-interval time	timer is 30 seconds.
	timer.		timer is 30 seconds.

Configuring temperature thresholds for a device or a module

Configuring basic temperature thresholds

The following matrix shows the feature and hardware compatibility:

	Hardware	Feature compatible
	F1000-A-EI/F1000-S-EI	No

	F1000-E	Yes

	F5000	Yes

	Firewall module	12500/10500 Enhanced FW: No
	Firewall module	Others: Yes
		Others: Yes

	U200-A	No

	U200-S	Yes

You can set the temperature threshold to monitor the temperature of a device or a module. When the temperature reaches the threshold, the device generates alarms.

To configure basic temperature thresholds:

Step		Command	Remarks
1.	Enter system view.	system-view	N/A

2.	Configure the basic	temperature-limit slot-number	By default, the lower threshold is
	temperature thresholds for a	temperature-limit slot-number	0°C (32°F), and the upper
	temperature thresholds for a	lower-value upper-value	0°C (32°F), and the upper
	device or a module.	lower-value upper-value	threshold is 50°C (122°F).
	device or a module.		threshold is 50°C (122°F).

Configuring advanced temperature thresholds

The following matrix shows the feature and hardware compatibility:

Hardware	Feature compatible
F1000-A-EI/F1000-S-EI	Yes

F1000-E	No

F5000	No

	103