Figure 58 Basic configuration wizard—3/6 (service management)

6.Configure the parameters as described in Table 12. Table 12 Configuration items

ItemDescription

FTP

Telnet

HTTP

Specify whether to enable FTP on the device.

Disabled by default.

Specify whether to enable Telnet on the device.

Disabled by default.

Specify whether to enable HTTP on the device, and set the HTTP port number. Enabled by default.

IMPORTANT:

•If the current user has logged in to the Web interface through HTTP, disabling HTTP or modifying the HTTP port number will result in disconnection with the device. Therefore, perform the operation with caution.

•When you modify a port number, make sure the port number is not used by another service.

77