HP Firewall Logging in to the firewall module from the network device, Feature and hardware compatibility, Logging in to the firewall module from the network device

Logging in to the firewall module from the network device

Feature and hardware compatibility

Hardware	Feature compatible
F1000-A-EI/F1000-S-EI	No

F1000-E	No

F5000	No

Firewall module	Yes

U200-A	No

U200-S	No

This chapter describes how to log in to the firewall module from the network device. Other login methods for the firewall module are the same as a firewall.

Logging in to the firewall module from the network device

Before logging in to the firewall module from the network device, you must configure the AUX user interface of the firewall module.

To configure the AUX user interface:

Step		Command	Remarks
1.	Enter system view.	system-view	N/A

2.	Enter AUX user interface	user-interface aux first-number	N/A
	view.	[ last-number ]	N/A
	view.	[ last-number ]

3.	Specify the none	authentication-mode none	By default, the AUX user interface uses
	authentication mode.	authentication-mode none	password authentication.
	authentication mode.		password authentication.

4.	Configure the user	user privilege level level	0 by default. HP recommends you set
	privilege level.	user privilege level level	it to 3.
	privilege level.		it to 3.

To log in to the firewall module from the network device:

Task	Command	Remarks
Log in to the firewall module from	oap connect slot slot-number	Available in user view of the network
the network device.	oap connect slot slot-number	device (switch or router).
the network device.		device (switch or router).