Table 13 Configuration items

ItemDescription

Set the approach for obtaining the IP address, including:

•None—The IP address of the interface is not specified. The interface has no IP address.

 

• Static Address—Specify the IP address for the interface

IP Configuration

manually. If you select this item, specify both the IP

address and the mask.

 

 

• DHCP—The interface obtains an IP address

 

automatically through the DHCP protocol.

 

• Do not change—The IP address of the interface does

 

not change.

IMPORTANT:

Modification to the interface IP address results in disconnection with the device, so make changes with caution.

IP Address

If you select Stack Address as the approach for obtaining

 

the IP address, set the interface IP address and network

Mask

mask.

 

 

9.Click Next.

The page for configuring NAT appears.

Figure 60 Basic configuration wizard—5/6 (NAT configuration)

10.Configure the parameters as described in Table 14.

79