Drag—Place the point of the stylus on the screen and drag an item across the screen without lifting the stylus until you have completed the selection. Dragging is equivalent to dragging with the left mouse button pressed on your computer.

Tap and hold—Hold the stylus pointer on an item for a short time until a menu displays. Tapping and holding is equivalent to right-clicking your computer mouse button. When you tap and hold, a circle of blue dots appears around the stylus to indicate that the menu will soon pop up.

Setting the Date and Time

When you turn on your HP iPAQ for the first time, you are requested to

select your time zone. After setting the time zone, you still need to set the time and date on your unit. Tap the Clock icon on the Today screen to set

the time and date. All three settings are located in the Clock Settings screen and can be set at the same time.

NOTE: By default, the time on the HP iPAQ is synchronized with your computer each time the two devices connect using ActiveSync.

Setting the Time for Home and Locations You Are Visiting

From the Start menu, tap Settings > System tab > Clock & Alarms icon.

SHORTCUT: From the Today screen, tap the Clock icon to set the time.

1.Tap either Home or Visiting.

2.Tap the time-zonedown arrow, and select the appropriate time zone.

3.Tap the hour, minutes, or seconds, and use the up and down arrows to adjust the time.

SHORTCUT: You can also adjust the time by moving the hands of the clock with the stylus.

4.Tap AM or PM.

5.Tap OK.

6.Tap Yes to save the time.

Setting the Date

1.From the Start menu, tap Settings > System tab > Clock & Alarms icon.

SHORTCUT: From the Today screen, tap the Clock icon to set the date.

2.Tap the down arrow by the date.

3.Tap the left or right arrow to select a month and year.

Getting to Know Your HP iPAQ Mobile Messenger

1–4