b.Use Display to adjust backlight brightness and set a timer to turn off the backlight, if HP iPAQ is not used.

c.Use Power to set a timer to turn off the power if HP iPAQ is not used.

d.Use Wireless to keep wireless settings On or Off (Phone and Bluetooth).

5.Tap OK when you have finished setting the profile.

6.Tap Yes to save your changes to the selected profile.

Switching a Profile

To quickly switch a profile from within any application:

1.Press and hold the Power button to bring up the quick access menu.

NOTE: The quick access menu includes five tasks and a shortcut to Profile Settings, in addition to the profile selections that allow you to switch tasks.

2.Tap the desired profile.

NOTE: The quick access menu disappears after 10 seconds.

NOTE: When the Backlight is adjusted to its lowest setting, it cannot be

turned on from the quick access menu. It can only be turned back on by accessing the Start menu > Settings > System tab > Backlight > Brightness tab and adjusting the brightness level. The brightness level can also be accessed from the battery icon if the TodayPanel

is displayed.

Making and Receiving Phone Calls

You can now make local or long distance domestic calls and, if you requested the setup, you can also make international calls.

Using the Phone Features

5–9