To change the default settings:
1.From the Start menu, tap Settings > Connections > Quick GPS Connection icon.
2.In the Settings tab, tap the check boxes to enable or disable the following settings:
•Enable updates—This setting allows you to enable or completely disable the Quick GPS Connection capability. If you disable it, then your HP iPAQ will no longer receive Quick GPS Connection updates and your GPS start-up times could take a few minutes in unfavorable conditions.
•Initiate GPRS Connection for updates—This setting allows Quick GPS Connection updates to your device over the air when enabled.
•Show expiration reminders and warnings—This setting reminds you by notification when your satellite location file is out-of- date. If this setting is not enabled, notifications do not occur.
•Show tray icon on today screen—This setting turns on a Quick GPS Connection icon in the Command bar that notifies you by its color if your satellite location file is up-to-date.
•Blue icon—Up-to-date settings
•Blue/Gray icon—Less than 50% time remaining until settings expire
•Gray icon—Expired settings
NOTE: The Quick GPS Connection data on your HP iPAQ can be automatically updated using a wireless (GPRS) connection. This setting is called “Initiate GPRS Connection for updates” as described above. Since the update files are small, you should be able to download them wirelessly with little impact to device performance.