Menu Guide
System Setting
5. Screen Type
If you have a TV set with the 4:3 picture format and the transmission is in 16:9, you can select 4:3 letterbox, 4:3 full screen and 16:9 full screen.
1.Select the aspect ratio of TV which is connected to STB and then press OK( OK ) button.
Note 1: Fullscreen will fill up the screen but cut off some information on the left and right sides.
2:Letterbox will give a complete picture, but leave black areas at the top and bottom.
3:For easy selection of Screen Type, press the P.SIZE button on your remote control.
6.Banner Time
When you switch channels, an information banner will be shown for a few seconds.
You can select for how long the banner will be shown.
1.Select the banner time you want and then press OK( OK ) button.
2.Each selectable time items has meaning of the interval time during a channel banner stays on changed channel screens.
The time ranges 1, 3, 6, 9 12 and 15 seconds.
7.RF Mode (option)
You can select the RF Mode. If you get picture but no sound, the RF Mode selecting might be wrong.
Select an RF Mode and then press OK( OK ) button.
RF Mode : PAL BG, PAL I, PAL DK, SECAM L, NTSC M
35DIGITAL SATELLITE RECEIVER