HP LP 2000r manual HP Rack Accessories, Front doors, side panels and tie kits, Model Number

HP Netserver High Density Rack Solutions Overview (LP 2000r)

HP Rack Accessories

In addition to the rack itself, HP offers numerous accessories to increase the convenience and safety of having your servers installed in a rack.

Front doors, side panels and tie kits

Each HP Rack System/E racks include a perforated, lockable rear door. In addition optional side panels and a front door can be chosen as your needs demand.

All the three available front doors—different only by their heights—offer 63% per- foration so that the equipment mounted in the rack can be clearly seen through the door. Also, the large perforations allow for optimum ventilation.

The doors can be mounted to open either to the left or to the right and come com- plete with all the mounting hardware. The quick-disconnect hinges allow the door to be easily lifted off without tools but prohibit it to be removed when the door is locked. A torx 25 driver is the only tool required for installation of hinges.

For Use with HP Rack Model Number	HP Front Door Product Number
HP Rack System/E41 (J1500A)	J1509A
HP Rack System/E33 (J1501A)	J1510A
HP Rack System/E25 (J1502A)	J1511A

To cover the sides of the racks - whether for protection or appearance—HP provides kits consisting of enough PC-ABS injection molded plastic snap-in side panels to cover both sides of the racks. Because they can be removed and installed easily without tools, access to the equipment inside is always effortless and convenient.

For Use with HP Rack Model Number	Content	HP Side Panel Kit
	Model Number
HP Rack System/E41 (J1500A)	2 each 9U side panels	J1506A
	8 each 8U side panels
HP Rack System/E33 (J1501A)	2 each 9U side panels	J1507A
	6 each 8U side panels
HP Rack System/E25 (J1502A)	2 each 9U side panels	J1508A
	4 each 9U side panels

In some systems with multiple servers, you may decide to install peripherals and additional equipment in a second, or even third, rack. In such instances, the HP Tie Kits allow you to add lateral stability by mechanically connecting the racks.

There are two kits to choose from per the following table. The kits include fasteners to tie the racks together at the top and the bottom (both front and rear) as well as cosmetic covers.

This hardware has been designed so that you can tie the racks together after the servers and/or other equipment have already been installed. There is no need to turn off the power to the system.

12