HP Netserver High Density Rack Solutions Overview (LP 2000r)

B. 2-post EIA standard non-HP racks (3 options)

1. Fixed, center mounting

All mounting hardware brackets are included as standard equipment with the HP Netserver LP 2000r. Only a T-15 Torx driver and a Number 2 Phillips screwdriver are needed for installation.

2. Fixed, flush mounting

All mounting hardware brackets are included as standard equipment with the HP Netserver LP 2000r. Only a T-15 Torx driver and a Number 2 Phillips screwdriver are needed for installation.

Additional installation steps may be required and are available at http://www.hp.com/racksolutions/support

21

Page 26
Image 26
HP LP 2000r manual Post EIA standard non-HP racks 3 options, Fixed, center mounting, Fixed, flush mounting