HP LP 2000r HP Power Distribution Options

HP Netserver High Density Rack Solutions Overview (LP 2000r)

HP Power Distribution Options

HP offers a series of Power Distribution Units (PDU) for use when the HP Netserver LP 2000r is to be mounted in a rack. The PDUs are especially convenient when mounting multiple servers as you simply route each power cord to the closest PDU rather than to the local power source or the Uninterruptible Power Supply (UPS), if used.

In addition to convenience, the HP PDUs also provide protection for the servers. All feature a circuit protector for each power phase. If one phase shorts, one or both of the circuit protectors trip.

Unlike other PDUs, the HP devices are slim and allow you to easily reach the servers and other equipment from any angle. All mounting hardware is built in (mounting brackets) or included (mounting screws and nuts) so there is nothing extra to order.

The PDUs mount quickly out-of-the-way on the rear posts of HP four- post racks, either vertically along the posts or horizontally between them, as your needs dictate. The rear columns have four dedicated spaces to mount the PDUs, so that they won’t interfere with the hinges and latches of the rack door or the equipment in the rack.

Routing power cords from the HP Netserver LP 2000r is straight forward since the cords and the PDUs are all located at the rear of the rack.

There are four types of PDUs available for use with the HP Netserver

LP 2000r, depending on your voltage and outlet requirements:

Voltage	Current	Outlets		HP Product Number
		Number	Type
100-127 VAC	16 A	9	NEMA 5-15R	E7675A1
		1	IEC 320 C-13
100-240 VAC	16 A	6	C-13 receptacles	E7671A
		2	C-19 receptacles
100-240 VAC	16 A	10	C-13 receptacles	E7676A
100-240 VAC	16 A	7	IEC 320 C-13	E7674A
		1	IEC 320 C-19
		1	IEC 320 C-20

1Hp recommends using the 100-240 VAC PDUs wherever possible

E7675A	E77671A	E7676A
(100-127 VAC)	(100-240 VAC)	(100-240 VAC)

14