HP Netserver High Density Rack Solutions Overview (LP 2000r)

Length

Connectors

Connectors

HP Model Number

 

CPU side

Console Switch side

 

 

 

 

 

4 ft (1.2 m)

1 ea “D” high density video connector

1 ea 25-pin “D” connector

J1483A

 

1 ea standard DIN type keyboard connector

 

 

 

and 1 ea standard DIN type mouse connector

 

 

 

 

 

 

8 ft (2.4 m)

1 ea “D” high density video connector

1 ea 25-pin “D” connector

J1476B

 

1 ea standard DIN type keyboard connector

 

 

 

and 1 ea standard DIN type mouse connector

 

 

 

 

 

 

15 ft (4.6 m)

1 ea “D” high density video connector

1 ea 25-pin “D” connector

J1477B

 

1 ea standard DIN type keyboard connector

 

 

 

and 1 ea standard DIN type mouse connector

 

 

 

 

 

 

The cables above are also used to tier the console switches. The 25-pin end of the cable is connected to one of the ports in the console switch and the three connectors on the other end goes into the daisy- chained switch’s video, mouse and keyboard receptacles. So, when you’re planning your multiple server system, be sure to note that one port in the 4- or 8-Port Console Switch is used for daisy-chaining.

The HP 2-User Expansion Kit is easily connected to the Console Switch using a standard Category 5 Unshielded Twisted Pair cable with a RJ-45 style modular plug on the switch end and an EIA (TIA) 568 B plug, commonly used for 10BaseT Ethernet, on the expansion kit end. The second system console then connects to the Expansion Box and can actually be placed up to 500 ft away from the Console Switch.

HP Rackmount Flat Panel Monitor and Keyboard

When planning a multiple server system—as with any system that features a computer—one important decision you have to make is where to place the system console. It is typically a large device compared to the rest of the equipment and requires excessive amount of vertical space if placed in the

system rack.

To solve the planner’s dilemma, HP offers a space-saving solution: A high quality 15-inch flat panel display and a full keyboard with a trackball and wrist support that fits into only 2U of vertical space.

The display is a TFT active matrix and guarantees a flicker-free picture at refresh rates as low as 60 Hz.

Kit Contains

HP Model Number

 

 

15-inch High Quality Monitor

J1470A

Keyboard with trackball and wrist rest

 

Sliding drawer assembly with cable management arm

 

All mounting hardware

 

HP Rack System/E Vertical Extension Kit

How do you add a few more inches of rackmounting space? There really is a way with the HP Rack System/E Vertical Extension Kit, HP part number J1471A. Suddenly, you get more inches to use for several additional servers, storage units, or networking equipment. Up to 8U, in fact.

The extension kit installs easily in minutes, without emptying the rack or using special tools. It comes complete with a rear door extension and two each 8U side panels.

HP Vertical Extension Kit

Includes

 

 

J1471A

Four column extensions, One rear hinge, One rear door extension, Two 8U side panels,

 

All mounting hardware, Installation instructions

 

 

18