HP Netserver High Density Rack Solutions Overview (LP 2000r)
Installation
Ease of installation is one key to speedier deployment. Fortunately, mounting and bringing multiple HP Netservers LP 2000r online is quick with only a few steps to follow.
At this point, bring out the power and physical space calculations you made based on the preceding sections and verify that the conditions are still valid. During the deployment, computing requirements are often modified and therefore changes will have to be made in the racks or the racked equipment, which in turn affects the thermal or power calculations.
CAUTION This is a safety class I product and has a protective earthing (grounding) terminal. There must be an uninterruptible safety earth ground from the main power source to the product’s input wiring terminals, power cord, or supplied cord set. Whenever it is likely that the protection has been impaired, disconnect the power cord until the ground has been restored.
CAUTION Due to types of products that can be installed in this cabinet, there is a risk of high leakage current (3.5 mA). Reliable ground circuit continuity is vital for safe operation of this product. To reduce risk of electric shock, earth (ground) connection is essential before connecting the power supply. Never operate this cabinet with the ground conductor disconnected.
CAUTION To reduce the risk of overload, do not load any single PDU with more than a maximum of 16 A. In addition, do not load a single NEMA
CAUTION To reduce the risk of cabinet instability, fully deploy the
Flexible installation options
A. 4-post (HP System/E racks or EIA standard cabinets)
Slide mounting
This is the perfect solution for
All mounting hardware is included as standard equipment with the HP Netserver LP 2000r.
Attaching the slides is a
19