Problem

I'm getting strange symbols, incorrect fonts, etc., when I try to print a document.

Solutions

1.Check to be sure that the printer driver you have selected in your software matches the printer emulation.

2.Press SHIFT and SEL keys, then press GROUP key.

This will print a line showing the emulation you have selected.

3.If you have embedded any printer commands in your software, check to be sure that you entered them correctly.

Problem

Ink smears on the paper when I print narrow columns.

Solution

This may be caused by excessive printhead travel from the centering position. Enter the Menu and set the Centering Position to MODE 1. See “Using Your Printer, Menu Mode.”

For the wide-carriage printer, if MODE 1 doesn't work, try setting the Centering Position to MODE 2.

Problem

I've installed a new ribbon and the printing is smeared and streaked.

Solution

The ribbon shield (1) is either loose or missing.

1

Remove the ribbon cartridge and check the ribbon shield.

lIf it is loose, secure it.

lIf it is missing, find it and install it.

TROUBLESHOOTING > 67