FORMS TEAR-OFF

There are two ways to determine the status of the Forms Tear-Off menu setting:

lPrint the Menu.

lUse the TEAR key.

To print the Menu:

1

2

3

4

1.Make sure paper is loaded.

2.Hold SHIFT (2), then press SEL (1) to enter the Menu Mode.

3.Press PARK (4) to print the menu.

4.Look for the Form Tear-Off setting in the paper feed group you are using (Rear Feed, Bottom Feed or Top Feed—Forms Tear– Off appears in the Top Feed group only if the optional Roll Paper Stand is installed).

To use the TEAR key:

1.Make sure paper is loaded, and wait 2 seconds.

2.Press TEAR (3).

l If the paper moves up, Forms Tear-Off is OFF. l If the paper moves down, Forms Tear-Off is ON.

USING YOUR PRINTER > 15