PRINTHEAD GAP

1.The printhead gap is the distance between the printhead and the platen.

CAUTION!

Make sure the printer is turned OFF before you open the access cover.

To adjust the gap, open the access cover and move the coloured lever

(1) to the recommended setting from the table.

1

Setting Media

1Standard paper

22-part form (with carbon)

33-part form (with carbon)

44-part form (with carbon)

5Envelopes or extra thick paper

NOTE

When the head gap is set to 2, 3, 4 or 5, the printer automatically slows down for better print quality with multipart forms.

USING YOUR PRINTER > 24