![](/images/new-backgrounds/1241539/24153943x1.webp)
Write filters
Choosing the write filter
HP Windows Embedded Standard digital signage players include both the Enhanced Write Filter (EWF) and the
The writer filter is disabled by default.
TIP: Choose the Enhanced Write Filter to protect an entire partition from writes, or choose the File-
based Write Filter to allow specific local applications and files to be updated dynamically.
To select the EWF or FBWF, perform the following steps:
1.Log on as an Administrator.
2.Select Start > Control Panel > HP Write Filter Configuration.
3.Select and configure the desired write filter.
4.Reboot the system for the chosen write filter selection and configuration to take effect.
Enhanced Write Filter Manager
WES includes the Enhanced Write Filter (EWF) console application
The EWF manager console application can be used to issue a set of commands to the EWF driver, report the status of each protected volume overlay, and report the format of the overall EWF configurations.
By including the EWF manager console application component in the configuration and building it into the
Benefits of the Enhanced Write Filter
The EWF provides a secure environment for digital signage player computing. It does this by protecting the digital signage player from undesired writes. For the MP4 unit, the write filter also extends the life of the digital signage player by preventing excessive flash write activity. It gives the appearance of
The intercepted flash writes stored in cache are available as long as the digital signage player remains active, but they will be lost when the digital signage player is rebooted or shut down. To preserve the results of writes to the registry, the contents of the cache can be transferred to the flash on demand or manually using the Enhanced Write Filter Manager.
After the write filter has been disabled, all future writes during the current boot session are written to the storage device, with no further caching until a reboot occurs. The write filter may also be enabled/ disabled through the command line. Always enable the writer filter after all of the permanent changes have been successfully made.
16 Chapter 5 Control panel extended selections