5.Remove the display bezel (4).

6.If it is necessary to replace the webcam module, gently pull the module away from the double- sided tape on the display enclosure (1), disconnect the webcam cable from the module (2), and then remove the webcam.

7.If it is necessary to replace the display panel, remove the four Phillips PM2.5×5.0 screws (1) at the bottom of the display panel.

8.Remove the two broadhead Phillips PM2.0×4.0 screws (2) at the top of the display panel.

Component replacement procedures 67

Page 75
Image 75
HP PB 6460B LQ177AW#ABA, QS020US, QX760US, LJ540UT 14 LJ540UT#ABA, 8460p LJ541UT 14.0 LJ541UT#ABA manual