HP LJ540UT 14 LJ540UT#ABA, PB 6460B LQ177AW#ABA, QS020US, QX760US, 8460p LJ541UT 14.0 LJ541UT#ABA

4.Remove the battery (see Battery on page 63).

5.Remove the bottom door (see Bottom door on page 70).

6.Remove the fan (see Fan on page 90).

7.Remove the heat sink (see Heat sink on page 91). Remove the processor:

1.Position the computer upside-down with the front toward you.

2.Use a flat-bladed screwdriver to turn the processor locking screw (1) one-half turn counterclockwise until you hear a click.

3.Lift the processor (2) straight up and remove it.

NOTE: The gold triangle (3) on the processor must be aligned with the triangle (4) embossed on the processor slot when you install the processor.

Reverse this procedure to install the processor.

Component replacement procedures 95