3.Lift the USB 3.0 board from the connector and mounting posts, and remove it from the system board (2).
Reverse the preceding procedure to install the USB 3.0 board.
ExpressCard assembly
Description | Spare part number |
|
|
ExpressCard assembly | |
|
|
Before removing the ExpressCard assembly, follow these steps:
1.Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.
2.Disconnect all external devices connected to the computer.
3.Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then unplugging the AC adapter from the computer.
4.Remove the battery (see Battery on page 63).
5.Remove the following components:
a.Remove the bottom door (see Bottom door on page 70).
b.Hard drive (see Hard drive on page 76)
