Armstrong World Industries 183, 243, 302, 242, 122, 123, 203, 182 Evaporator Blower Assembly Removal

UNIT TEAR DOWN Magic-Pak: HW/HWC

3-6

Evaporator Blower Assembly Removal:

The evaporator blower assembly is removable as one complete section. To remove the assembly, the chassis must be removed first (see page 3- 4). Refer to the following directions and Figure 3-5.

To remove the evaporator blower assembly:

1.Remove the four mounting screws from the blower assembly.

2.Remove the four control panel screws.

3.Slide control panel toward yourself about 1".

4.Disconnect the electrical wiring to the motor.

5.Pull blower assembly up and out from chassis.

MOUNTING SCREWS

EVAPORATOR BLOWER

ASSEMBLY

R

O

T

A

T

I

O

N

CONTROL PANEL

SCREWS

Figure 3-5

CHASSIS BASE

PERMAGUM SEAL

(BETWEEN BASE RAIL AND CHASSIS BASE)

SRM-HW/HWC

8/99