Hard drive

NOTE: All hard drive spare part kits include a hard drive bracket and screws.

Description

Spare part number

 

 

750-GB, 7200-rpm hard drive

633252-001

 

 

640-GB, 5400-rpm hard drive

637312-001

 

 

500-GB, 7200-rpm hard drive

634919-001

 

 

500-GB, 7200-rpm hard drive (for use in the upgrade bay)

656424-001

 

 

500-GB, 5400-rpm hard drive

634932-001

 

 

320-GB, 7200-rpm, Self-Encrypting Drive (SED) hard drive

626978-001

 

 

320-GB, 7200-rpm hard drive

627731-001

 

 

320-GB, 5400-rpm hard drive

622643-001

 

 

250-GB, 7200-rpm hard drive

635225-001

 

 

256-GB solid-state drive

669684-001

 

 

256-GB solid-state drive, Self-Encrypting Drive (SED)

684565-001

 

 

256-GB solid-state drive, SATA III

681123-001

 

 

160-GB solid-state drive

643916-001

 

 

128-GB solid-state drive

643917-001

 

 

128-GB solid-state drive, SATA III

681122-001

 

 

120-GB solid-state drive

669685-001

 

 

Upgrade Bay - Hard Drive Adapter Kit

643921-001

 

 

Before disassembling the computer, follow these steps:

1.Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.

2.Disconnect all external devices connected to the computer.

3.Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then unplugging the AC adapter from the computer.

4.Remove the battery (see Battery on page 63).

5.Remove the bottom door (see Bottom door on page 70).

Remove the hard drive:

1.Position the computer upside-down, with the battery bay toward you.

2.If necessary, lift the smart card reader out of the way.

3.Loosen the three captive Phillips screws (1) that secure the hard drive to the computer.

76 Chapter 4 Removal and replacement procedures