Step 7 — Install the Software

NOTE Do not turn on your HP OfficeJet Pro yet!

Now you need to install software so that the HP OfficeJet Pro can work with your computer.

HP Software

1Turn on or reboot your computer.

If you see the following screen, press the Esc key on your keyboard to close the “New Hardware Found” dialog.

2Start the installation by doing one of the following:

Insert CD-ROM #1 into your computer’s CD-ROM drive. The software installation setup should start automatically (in less than a minute).

If the software installation does not start automatically, from the Task bar, select the Start menu, and select Run. Enter z:\setup (substitute your CD-ROM drive letter for the “z”).

The “Welcome” screen appears. Click Next>.

2-14Setting Up Your New HP OfficeJet Pro