3.Remove the five Philllips PM2.4×4.6 screws (2) that secure the tablet battery to the display panel assembly.

4.Remove the tablet battery (3).

Reverse this procedure to install the tablet battery.

Solid-state drive

Description

Spare part number

 

 

256-GB, M2, SATA-3, solid-state drive

766636-001

 

 

256-GB, M2, SATA-3, SED, OPAL2, solid-state drive

766637-001

 

 

180-GB, M2, SATA-3, solid-state drive

766634-001

 

 

180-GB, M2, SATA-3, SED, OPAL1, solid-state drive

766635-001

 

 

128-GB, M2, SATA-3, solid-state drive

766633-001

 

 

64-GB, M2, SATA-3, solid-state drive

766632-001

 

 

Before removing the solid-state drive, follow these steps:

1.Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and then shut it down through the operating system.

2.Disconnect the power from the tablet by unplugging the power cord from the tablet.

3.Disconnect all external devices from the tablet.

4.Remove the back cover (see Back cover on page 39).

5.Disconnect the tablet battery cable from the system board (see Tablet battery on page 44).

Tablet replacement procedures 45

Page 53
Image 53
HP Pro x2 612 G1 manual Solid-state drive