Power connector cable
Description | Spare part number |
|
|
Power connector cable | |
|
|
Before removing the power connector cable, follow these steps:
1.Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and then shut it down through the operating system.
2.Disconnect the power from the tablet by unplugging the power cord from the tablet.
3.Disconnect all external devices from the tablet.
4.Remove the back cover (see Back cover on page 39).
5.Disconnect the tablet battery cable from the system board (see Tablet battery on page 44).
6.Remove the tablet I/O board (see Tablet I/O board on page 59).
Remove the power connector cable:
1.Remove the Philllips PM1.5×3.5 screw (1) that secures the power connector cable to the tablet frame.
2.Remove the power connector cable (2).
Reverse this procedure to install the power connector cable.
Home button board
Description | Spare part number |
|
|
Home button board (includes cable) | |
|
|
Tablet replacement procedures 61
