Chapter 7
Setting up online destinations in the camera
You can specify up to 34 custom destinations (such as individual
1.Verify that your computer is connected to the Internet.
2.While in the Photosmart Express Menu, use 
to highlight 
Share, then press
. If you have already created destinations, highlight Share Menu Setup and press 
again.
3.Connect the camera to your computer. Follow the on-
screen instructions to set up destinations in your camera.
4. Turn off the camera and disconnect the camera from the computer. Turn on the camera, access the Photosmart Express Menu, then highlight
Share and press 
to verify that the new destinations are now in the camera.
Sending images to online destinations
After you have set up online destinations in the camera, you can mark images to be sent to these custom destinations the next time you connect your camera to your computer.
1.While in the Photosmart Express Menu, use 
to highlight 
Share, then press
.
2.In the Share 
.
–Custom 
.
–All 
in the 
to select each destination. After selecting destinations, press 
. This option is available only if you have tagged at least one image (see Tagging images on page 26).
–All 
to select each destination. After selecting destinations, press 
. This option is available only if you have more than one image in the camera.
3.To mark additional images to share, use 
to display an image, then repeat Step 2.
4.When you are done marking images to share, press 
repeatedly until you return to 
Playback.
5.To send the images to the destinations, see Transferring images with HP Photosmart Software on page 32.
38
