Setting Up the Scanner
2.Gently tug the cable to ensure the connector is properly secured.
3.Connect the other end of the interface cable into a USB port on the POS computer.
Removing the USB Interface Cable
1.Unplug the installed cable’s modular connector by depressing the connector clip with the tip of a screwdriver.
2. Carefully slide out the cable.
Assembling the Stand
The stand allows
1.Unscrew the wingnut from the bottom of the neckpiece scanner cup.
2.Fit the bottom of the neck piece 1 into the opening on the top of the stand base 2.
3.Tighten the wingnut 3 underneath the base to secure the cup and neck piece to the base.
✎Before tightening the wingnut under the base, ensure that the flat areas on the flexible neck fit securely in the grooves in the base.
www.hp.com | User Guide |
