Programming User Preferences
or setting Data Transmission Formats, require that you scan several bar codes. Refer to “Laser On Time” in this chapter and “Scan Data Transmission Format” in the Programming Reference Guide on the software and documentation CD for descriptions of this procedure.
Errors While Scanning
Unless otherwise specified, if you make an error during a scanning sequence, just
User Preferences Default Parameters
The following table lists the defaults for user preferences parameters. If you want to change any option, scan the appropriate bar code(s) provided in the “User Preferences” section of this chapter.
User Preferences Default
Parameter | Default |
|
|
Set Default Parameter | All Defaults |
|
|
Beeper Tone | Medium |
|
|
Beeper Volume | High |
|
|
Power Mode | Continuous On |
|
|
Laser On Time | 3.0 Sec. |
|
|
Beep After Good Decode | Enable |
|
|
www.hp.com | User Guide |
