Operating the Scanner
Standard Beeper Definitions
Beeper Sequence | Indication |
|
|
Low/medium/high beep | Power Up. |
|
|
Short high beep | A bar code symbol was decoded (if |
| decode beeper is enabled). |
|
|
4 long low beeps | A transmission error was detected in |
| a scanned symbol. The data is |
| ignored. This occurs if a unit is not |
| properly configured. Check beeper |
| sequence option setting. |
|
|
5 low beeps | Conversion or format error. |
|
|
Lo/hi/lo beep | ADF transmit error. |
|
|
Parameter Menu Scanning |
|
|
|
Short high beep | Correct entry scanned or correct |
| menu sequence performed. |
|
|
Lo/hi beep | Input error, incorrect bar code or |
| “Cancel” scanned, wrong entry, |
| incorrect bar code programming |
| sequence; remain in program mode. |
|
|
Hi/lo beep | Keyboard parameter selected. Enter |
| value using bar code keypad. |
|
|
Hi/lo/hi/lo beep | Successful program exit with change |
| in the parameter setting. |
|
|
Low/hi/low/hi beep | Out of host parameter storage |
| space. Scan Set Default Parameter |
| in this chapter. |
|
|
www.hp.com | User Guide |
