HP Smart Array Advanced Pack Software manual P212, P410, and P411 LEDs, Color Name Comments

P212, P410, and P411 LEDs

LED ID	Color	Name	Comments
1	Amber	DS9: System Error	The controller ASIC has locked up and cannot
			process any commands.
2	Green	DS8: Idle Task	This LED, together with the Gas Pedal LED (next
			item), indicates the amount of controller CPU
			activity. For more information, see the following
			table.
3	Green	DS7: Gas Pedal	This LED, together with the Idle Task LED (previous
			item), indicates the amount of controller activity. For
			more information, see the following table.
4	Green	DS6: Heartbeat	When the controller is in good health, this LED
			flashes every two seconds.
5	Green	DS5: Pending Command	The controller is working on a command from the
			host driver.
6	Green	DS4: Port 1 Active	Port 1 is active.
7	Green	DS3: Port 2 Active	Port 2 is active.
8	Amber	DS2: Drive Failure	To determine which drive has failed, check the Fault
			LED of each physical drive connected to the
			controller.
9	Amber	DS1: Diagnostics Error	One of the server diagnostics utilities has detected
			a controller error.

Gas pedal LED	Idle task LED	Controller CPU activity level
status	status
Off	Flashing	0-25%
Flashing	Off	25-50%
On steadily	Off	50-75%
On steadily	On steadily	75-100%

Component identification 17