| P700m, P711m, P712m, and P721m specifications | 35 | 
| P800, P812, and P822 specifications | 35 | 
| Battery pack service life | 36 | 
| Installation and configuration | 37 | 
| Procedures for controllers in a server | 37 | 
| Installing a  | 37 | 
| Installing a  | 38 | 
| Installing the controller board | 38 | 
| Connecting internal storage | 39 | 
| SAS cable part numbers | 40 | 
| Procedures for controllers in a server blade | 40 | 
| Installing a mezzanine controller in an unconfigured server blade | 40 | 
| Installing a mezzanine controller in a previously configured server blade | 41 | 
| Installing the mezzanine controller board | 42 | 
| Configuration tools | 43 | 
| Option ROM Configuration for Arrays | 43 | 
| 44 | |
| Array configuration tools | 44 | 
| System maintenance tools | 45 | 
| Updating firmware | 45 | 
| Installing device drivers | 45 | 
| Installing Management Agents | 46 | 
| Diagnostic tools | 46 | 
| Upgrade and replacement procedures | 48 | 
| Replacing the battery on the P212, P410, and P411 models | 48 | 
| Replacing the FBWC module on the P410 and P411 models | 49 | 
| Replacing the BBWC module on the P212, P410, and P411 models | 50 | 
| Replacing the FBWC module on the P222, P420, P421, and P822 models | 51 | 
| Installing an E500 or P400 cache battery | 53 | 
| Replacing an E500 or P400 cache battery | 54 | 
| Replacing the E500 or P400 cache | 55 | 
| Replacing the P700m cache battery | 56 | 
| Removing a P711m capacitor pack | 59 | 
| Replacing a P711m cache module | 60 | 
| Replacing a P712m cache module | 63 | 
| Replacing the FBWC module on the P721m | 64 | 
| Replacing a P800 cache battery | 65 | 
| Replacing the P800 cache module or controller | 70 | 
| Replacing a P812 cache module | 73 | 
| Replacing a P822 cache module | 77 | 
| Drive procedures | 79 | 
| Identifying the status of a legacy drive | 79 | 
| Identifying the status of an HP SmartDrive | 80 | 
| Recognizing drive failure | 81 | 
| Effects of a drive failure | 81 | 
| Compromised fault tolerance | 82 | 
| Recovering from compromised fault tolerance | 82 | 
| Replacing drives | 82 | 
| Before replacing drives | 83 | 
| Automatic data recovery (rebuild) | 83 | 
| Upgrading drive capacity | 86 | 
| Contents | 4 | 
