HP ST-C5USBV-300, ST-C5USBVA-300 manual Limitations, Materials

Limitations

•The XTENDEX will only work with USB keyboards and mice, other USB devices are not supported.

•PS/2 devices can be connected to the XTENDEX through an NTI USB-PS/2 adapter, however the translation keys described on page 15 will not function in this application.

•The XTENDEX can be used between two cascaded NTI switches, but the master switch in the configuration will not be able to list the CPUs connected to the extended slave. The OSD menu in the extended slave would have to be used to monitor CPUs connected to it. (This can be done by configuring command mode for the slave switch with an Alternate OSD Command Sequence).

MATERIALS

Materials supplied with this kit:

9NTI ST-C5USBV-300 USB Extender Local Unit

9NTI ST-C5USBV-300 USB Extender Remote Unit

92-120VAC or 240VAC 50 or 60Hz-9VDC/1A AC Adapters

9CD with a pdf file of this owner's manual

Additional materials may need to be ordered, depending upon the configuration :

¾Video adapter for connection between the Local and a non-VGA SUN CPU (13W3M-15HDF)

¾USBVEXT-3/6/10 (15HD Male-to-Female and USB Type A Male-to-Female Extension cable) if the Local Unit will be located further than 15" from the CPU or KVM switch

¾CAT5/5e shielded/unshielded twisted-pair cable(s) terminated with RJ45 connectors wired straight thru- pin 1 to pin 1, etc. (see pg. 14 for proper EIA/TIA 568B wiring method)

-OR-

CAT6 unshielded twisted-pair cable(s) terminated with RJ45 connectors wired straight thru- pin 1 to pin 1, etc. (see pg. 14 for proper EIA/TIA 568B wiring method)

Contact your nearest NTI distributor or NTI directly for all of your KVM needs at 800-742-8324 (800-RGB-TECH) in US & Canada or 330-562-7070 (Worldwide) or at our website at http://www.networktechinc.com and we will be happy to be of assistance.

2