Overview of Installation and Configuration

Allowable Values for HP VLANsAllowable Values for HP VLANs

Table 2-2 lists the allowable values for configuring VLANs in the /etc/rc.config.d/vlanconf file. It describes the parameter functions, default values, and allowable ranges.

For the format of the /etc/rc.config.d/vlanconf file, refer to

 

“Configuring VLANs by Editing vlanconf File” in this document.

Table 2-2

Allowable Values for Parameters in vlanconf File

 

 

 

 

 

Parameter --

 

Range andDefaultType
description

 

Restrictions

 

 

 

 

 

 

 

VLAN_ID -- VLAN ID

0 - 4094; unique within

None

Integer

 

 

NIC

 

 

 

 

1 VLAN ID per VLAN;

 

 

 

 

 

 

 

VLAN_PRIORITY --

 

0 - 7

0

Integer

802.1p priority for

 

 

 

 

outbound VLAN

 

 

 

 

frames

 

 

 

 

 

 

 

 

VLAN_TOS -- Type of

0 - 255

0

Integer

Service value

 

 

 

 

 

 

 

 

VLAN_PRI_OVERRIDE

CONF_PRI/

CONF_PRI

Case-sensitive

-- Priority Override

 

IP_HEADER/

 

character

level

 

CONF_TOS

 

string.

 

 

 

 

VLAN_TOS_OVERRIDE

IP_HEADER/

IP_HEADER

Case-sensitive

-- Type of service

 

ETHER_HEADER/

 

character

Override Level

 

CONF_TOS/

 

string.

 

 

CONF_PRI

 

 

 

 

 

 

VLAN_NAME -- VLAN

31 chars; keyword not

None1

Alphanumeric

name

 

allowed; unique within

 

character string.

 

 

NIC;

 

Case-sensitive

 

 

1 VLAN name per VLAN

 

 

 

 

 

 

VLAN_VPPA -- Virtual

starts at # 5000;

None

Integer

PPA number

 

1 VPPA per

 

 

 

 

vlanid; unique per system

 

 

 

 

 

 

 

Chapter 2

29