HP T1453-90001 manual Flowchart 1b Procedures

Troubleshooting

Flowchart 1: Link Level Tests

Flowchart 1b Procedures

•Execute lanscan command and verify your interface is displayed by the system.

—If it is displayed, run lanscan -vto ensure the VLAN ID is correct. If so, return to the network Test. If not, modify the VLAN to the correct one by running the command lanadmin -V modify.

—If the interface is not displayed, run lanadmin -V create to create the VLAN.

•If the problem is fixed, Stop. Else, check for any error messages.

—If there are error messages correct them according to the error message.

—If there are no error messages, return to the network Test.

Appendix A 63