Configuring VLANs by Editing vlanconf File
Modifying Parameters in vlanconf File
#VLAN_ID[1]=
#VLAN_PRIORITY[1]=
#VLAN_TOS[1]=
#VLAN_PRI_OVERRIDE[1]=
#VLAN_TOS_OVERRIDE[1]=
#VLAN_NAME[1]=””
#VLAN_VPPA[1]=
Example:
Following is an example where the physical interface lan0 has been assigned a VLAN ID of 1, default values for VLAN priority, VLAN ToS, VLAN priority override, VLAN ToS override, the name “Red,” and a VLAN PPA of 5000.
VLAN_PHY_INTERFACE[0]=lan0
VLAN_ID[0]=1
VLAN_PRIORITY[0]=0
VLAN_TOS[0]=0
VLAN_PRI_OVERRIDE[0]=CONF_PRI
VLAN_TOS_OVERRIDE[0]=IP_HEADER
VLAN_NAME[0]=Red
VLAN_VPPA[0]=5000
46 | Chapter 4 |