2.Insert and tighten the three screws.

Figure 2-7Replacing the metal side cover

To replace the access panel:

1.Place the access panel on the side of the unit, offset about 1/2–inch toward the front of the unit (1).

2.Slide the panel toward the rear of the unit until it locks into place (2).

3.Replace the two screws that secure the access panel to the chassis (3).

Figure 2-8Replacing the side access panel

External drives

Various external USB drives are available as options for the t5135/t5530. For more information about these drives, visit http://www.hp.com/products/thinclientsoftware, or refer to the instructions that accompany the option.

For more information about available options, visit the HP Web site at http://h30143.www3.hp.com/ configure2.cfm

14 Chapter 2 Hardware changes

ENWW