Local drives
The following sections describe the local drives located on the thin client.
Drive Z
Drive Z is the onboard volatile memory
Drive C and flash
Drive C is in the onboard flash drive. HP recommends that you do not write to drive C, as writing to drive C reduces the free space on the flash.
CAUTION: If the available free space on the flash drive is reduced to below 3 MB, the thin client becomes unstable.
A write filter is used by the thin client for security and to prevent excessive flash write activity. Changes to the thin client configuration are lost when the thin client is restarted unless the write filter cache is disabled or a
Saving files
CAUTION: The thin client uses an embedded operating system with a fixed amount of flash memory. HP recommends that you save files that you want to retain on a server rather than on your thin client. Be careful of application settings that write to the C drive, which resides in flash memory (in particular, many applications by default write cache files to the C drive on the local system). If you must write to a local drive, change the application settings to use the Z drive. To minimize writing to the C drive, update configuration settings as described in User accounts on page 11.
Mapping network drives
You can map network drives if you log on as either Administrator or User.
ENWW | Local drives 9 |
