MA7200 PLUS Inverter 1 to 2 HP PID Fan and Pump Quick Start Manual

__________________________________________________________________

Step 6 – Select Start / Stop Method of Control (Sn-04)

•Before selecting this parameter, ensure the inverter is in the STOP mode.

•The set-pointis selected by the keypad (Sn-05=0), and the start / stop method can be from the keypad or external contact (see Fig. 2a). NOTE: The set-point can also be set from an external source but commonly it is set from the keypad.

•The parameter (Sn – 04) is set to = 0 (keypad), as factory default. If external contact is desired, follow the navigation procedure below to set (Sn-04 = 1).

________________________________________________________________ 7

TECO – Westinghouse Motor Company