HP UX 11i v3 Diagnostic Flowcharts, at:, Connections Test, Flowchart 3: Boot Test, System Library (SysLib), Flowchart 2: Fibre Channel, parsing, and system control

System Library (SysLib)	A set of common routines for use by both the Test Controller
	and the Test Modules. These routines perform I/O, string
	parsing, and system control.

For more information on ODE, see the Itanium Processor Family (IPF) Offline Diagnostics and Utilities CD Overview at: http://docs.hp.com/en/diag.html#Offline%20Diagnostics

Diagnostic Flowcharts

The diagnostic flowcharts illustrate the following tests:

Flowchart 1: Configuration Test	Verifies the configuration of the mass storage interface on
	a host using the ioscan (1M) command.
Flowchart 2: Fibre Channel	Checks all hardware connections between your system
Connections Test	and Fibre Channel mass storage devices, to confirm that
	they are connected and operational.
Flowchart 3: Boot Test	Verifies that the system boots correctly over Fibre Channel.

See the Support Matrix for the Fibre Channel adapter you are troubleshooting for current system and adapter firmware requirements and other information. Support Matrixes for HP Fibre Channel adapters are available at: http://docs.hp.com/en/netcom.html#Fibre%20Channel

Figure 3-1 Flowchart 1: Configuration Test

1

A

Enter the ioscan command

	B	HP		C
			yes	Hardware	no
		adapter		state =	2 Go to Flowchart 2
		displayed?
				CLAIMED?
			no	yes
G	D	Is		H
Update
		System Firm-			no
System				Device
		ware version
	no				4 Go to Flowchart 2
Firmware		adequate?		displayed?
	E		yes
1				yes
		Enter the
	swlist command
				DONE
I	F
Reinstall	no	Is the
Fibre Channel		FC FILESET
software		displayed?
			yes
1		2	On Flowchart 2

26 Troubleshooting and Maintenance