Removing the Front Bezel

1.Remove/disengage any security devices that prohibit opening the computer.

2.Remove all removable media, such as compact discs or USB flash drives, from the computer.

3.Turn off the computer properly through the operating system, then turn off any external devices.

4.Disconnect the power cord from the power outlet and disconnect any external devices.

CAUTION: Regardless of the power-on state, voltage is always present on the system board as long as the system is plugged into an active AC outlet. You must disconnect the power cord to avoid damage to the internal components of the computer.

5.Remove the access panel.

6.Lift up the three tabs on the side of the bezel (1), then rotate the bezel off the chassis (2). Figure 2-4Removing the Front Bezel

ENWW

Removing the Front Bezel 13

Page 19
Image 19
HP VS803UT manual Removing the Front Bezel