HP VS803UT manual Removing an External 3.5-inch Drive

14.Rotate the drive cage back down to its normal position.

CAUTION: Be careful not to pinch any cables or wires when rotating the drive cage down. Figure 2-29Rotating the Drive Cage Down

15.Replace the access panel.

16.If the computer was on a stand, replace the stand.

17.Reconnect the power cord and turn on the computer.

18.Lock any security devices that were disengaged when the access panel was removed. The system automatically recognizes the drive and reconfigures the computer.

Removing an External 3.5-inch Drive

CAUTION: All removable media should be taken out of a drive before removing the drive from the computer.

The 3.5-inch drive is located underneath the 5.25-inch drive. You must remove the external 5.25-inch drive before removing the external 3.5-inch drive.

1.Follow the procedure in Removing an External 5.25-inch Drive on page 31 to remove the 5.25-inch drive and access the 3.5-inch drive.

CAUTION: Ensure that the computer is turned off and that the power cord is disconnected from the electrical outlet before proceeding.

36 Chapter 2 Hardware Upgrades ENWW