HP VS803UT manual Removing Bezel Blanks, 5Removing a Bezel Blank Hardware Upgrades

Removing Bezel Blanks

On some models, there are bezel blanks covering the 3.5-inch and 5.25-inch external drive bays that need to be removed before installing a drive. To remove a bezel blank:

1.Remove the access panel and front bezel.

2.To remove a bezel blank, push the two retaining tabs that hold the bezel blank in place towards the outer right edge of the bezel (1) and slide the bezel blank back and to the right to remove it (2).

Figure 2-5Removing a Bezel Blank

14 Chapter 2 Hardware Upgrades ENWW