8.Install four M3 metric guide screws in the lower holes on each side of the drive. HP has provided four extra M3 metric guide screws on the front of the chassis, under the front bezel. The M3 metric guide screws are black. Refer to Installing and Removing Drives on page 29 for an illustration of the extra M3 metric guide screws location.
CAUTION: Use only
NOTE: When replacing the drive, transfer the four M3 metric guide screws from the old drive to the new one.
Figure
9.Position the guide screws on the drive into the
Figure
34 Chapter 2 Hardware Upgrades | ENWW |