9.Remove the small center panel below the rear ports by pulling out the top of the panel (1) then lifting the panel off the computer (2).

Figure 2-8Removing the Center Panel

10.Before removing the memory access panel, you must remove the small cover plate that hides the screw used to secure the panel to the chassis. Lift up on the bottom of the cover plate located next to the upper inside corner of the access panel and lift the cover plate off the rear of the computer.

Figure 2-9Removing the Access Panel Screw Cover Plate

16 Chapter 2 Hardware Upgrades

ENWW

Page 22
Image 22
HP XZ837UT, 9300 manual Enww